|
|
 |
Hi Pot & electrical safety analyzer |
 |
 |
Vitrek Corporation, USA, World Leaders in Compliance Test Automation
- World's leading manufacturer of Compliance like hipot testers, Electrical Safety Tester and Electrical Safety Analyzers.
- Products for Global Electrical Safety such as, and DC Hipot (Dielectric Withstand),
- Insulation Resistance Measurement,
- Ground Bond Analyzers,
- High Voltage Scanning Systems,
- Precision High Voltage Measuring Devices
- Precision Transformer Tester.
|
 |
 |
| |
|
Vitrek has incorporated advanced DSP technology into the new 950i series to bring you the fastest, most capable,
feature rich hipot testers, Electrical Safety Tester and Electrical Safety Analyzers are
available for a surprisingly low price. Vitrek's new 950i Series combines high output power,
with a wide range of AC & DC voltage outputs and extremely low leakage current measurement. Then we added a 4-
wire milli-ohmmeter with dynamic range up to 100K ohms and an overlapping Tera-ohm class Insulation Resistance
function. Top that off with an available 40 Amp Ground Bond capability and you're just beginning to get a feel for
what the new Vitrek 950i Series Hipot Testers can do for you. Choose from the 951i, 952i, 953i, 954i, 955i or the
Ground Bond only 959i.
Features & Benefits:
-
Highest Level of Operator Safety - features include: HSSD™ High Speed Solid-State load Discharge -to
remove exposed voltages faster than passive resistor designs, SFI™ Safety Fault Interrupt - shuts down output in as
little as 50uS from detection, TLSS™ Test Lead Safety Sense - continuously verifies that test leads are properly
connected prior to and during HV and continuity testing, Recessed start switch prevents inadvertent actuation, Dual
Channel current measurement detects earth leakage faults
-
High Power Output- means better drive capability and increased test throughout. With up to 50mA of
current sourcing for AC & DC hipot the 950i Series gets heavy duty jobs done fast - available 200mA drive
tackles even tougher sourcing requirements
-
Wide Range of built-in Voltage Capabilities - starting at 6KV AC/DC extending to 10KVAC and 11KVDC
or up to 30KV RMS AC with external option
- Built-in Phase Angle Measurement - allows the measurement and display of both resistive (in-phase)
leakage current and reactive (out-of-phase) leakage current caused by capacitive coupling
- Pico-Amp Leakage Measurement insures that even the lowest leakage current levels are accurately
detected and tera-ohm range IR readings are stable and precise
- Multi-Mode IR - Insulation Resistance values up to one Tera-ohm can be obtained with precision in your
choice of 3 IR test modes - end test on timer, end test on pass reading or fail reading. Choose either AC IR or
DC IR to suit your measurement requirement
- Continuously Variable IR Test Voltage - Unlike most IR testers which limit you to 3 or 4 discrete test
voltages, the 950i Series allows you to select the test voltage you need. Starting as low as 2V all the way to
6.5KV or 11KV in the higher voltage models
-
Capacitance Test Modes - For AC & DC hipot and IR provide tightly controlled charge and discharge
profiles for superior results on critical solar panel tests and other highly capacitive loads
-
Solar Panel Testing Simplified - Designed with PV testing in mind, the 950i Series uses pico-amp
resolution to detect minute defects in solar cells while its HSSD High Speed Solid Discharge provides the
industry's safest and fastest throughput rates
|
| |
|
| |
|
Contact
Sitemap
Blog
