| |
Models |
| |
TP04310 |
TP04100A |
TP4500A |
| Systems Configuration |
System includes controller with
intuitive flat panel display,
p r ima r y h e a t e x c h a n g e r ,
extendable arm and quick
response thermal head; choice of
thermal cap, shroud kit and
insulation kit |
System includes controller cabinet
with intuitive flat panel display,
Thermal Wand, ; shroud kit and
insulation kit. Thermal Cap is
optional Accessory. |
System includes controller with
intuitive flat panel display,
primary heat exchanger, quick
response thermal head; 5.5 inch
thermal cap. Shroud Kit and
Insulation Kits are optional. |
| SYSTEM PERFORMANCE |
| Temperature Range |
-80° C to +225° C |
-20° C to +225° C |
-45° C to +225° C |
| Transition Rate |
-55° to +125° C: < 5 seconds
+125° to -55° C: < 13 seconds |
-10° to +125° C: < 30 seconds
+125° to -10° C: < 40 seconds |
-40° to +125° C: < 15 seconds
+125° to -40° C: < 25 seconds |
Temperature set.
Display, resolution & Accuracy |
+/- 0.1° C / 1.0°C (when calibrated against NIST transfer standard) |
| Air flow from system |
2.5 -9 l/s ( 5 - 18 scfm) continuous |
1 -3 l/s ( 2 - 6 scfm) continuous |
1.9 -4.7 l/s ( 4 - 10 scfm) cont. |
| Temperature Control Modes |
Air or Patented DUT Dual Loop Control |
Proprietiry Dual Loop Control |
| USERS FEATURES |
| Modes of Operation |
Two: "Manual" and "Program” |
| DUT Sensor Ports |
Type T and Type K Thermocouple |
| Test set-up configurations |
12 Manual Mode sets &
12 Program Mode sets |
Create & save up to
10 individual thermal test setup |
12 Manual Mode sets &
12 Program Mode sets |
| Ramp/soak/cycle configurations |
12 per test set-up in cycling mode |
10 per test set-up in cycling mode |
12 per test set-up in cycling mode |
| Remote interface Ports |
IEEE-488, RS232, ST/ET/SFF |
| Standards Compliance |
CE approved and SEMI S2-93A compliant |
| Calibration |
Automated, simplified and accurate for all airflows and DUT types |
| ESD Protection |
All ThermoStream's Air flow is Ionically balanced (free of static Charge) and contributes no measurable static
charge to DUT or test enclosure |
| ONLY NEEDS COMPRESSED DRY AIR SUPPLY AS PER SYSTEM REQUIREMENTS |
 |
Temptronic’s Mobile TempTM Systems combines ThermoStrema with high speed ThermoChambersTM to offer environmental Temperature test Systems
with fastest, most uniform temperature control in the industry. This portable, compact package enables temperature test at the test location
and is ideal for small lot qualification, burn-in, temperature cycling and research & development.
Features of Temperature test Systems
Contact
Sitemap
Blog
